Download Print this page
Valcom VE9894-1-Finish Specifications
Valcom VE9894-1-Finish Specifications

Valcom VE9894-1-Finish Specifications

Ip handsfree call station,single button,two button,three button,four button

Advertisement

Quick Links

INTRODUCTION
The VE9894-x-Finish Vandal Resistant IP
Handsfree Emergency Call Station provides
communication to a multiple answer locations, i.e.
Emergency assistance, general assistance,
information, directions and public accessible
recorded information.
Pressing a "Call" button on the IP emergency
phone initiates a call to any SIP telephone, SIP
address, PC softphone, Valcom intercom station or
to a Valcom IP gateway. At the time of activation a
call status LED begins to flash. When the call is
answered the call status LED remains "ON". When
the called party terminates the call, the LED is
extinguished, the connection is released
automatically. An "Emergency Call" has priority
over any other call in progress.

SPECIFICATIONS

Features:
 Power over Ethernet (PoE) 802.3af compatible
 Compatible with most modern IP Telephone
systems
 Call buttons calls a SIP address or any Valcom
Gateway
 Automatic Talkback VOX operation (no Push To
Talk button needed)
 Easy, RJ-45 plug in, Cat 5 or 6, LAN /WAN
10/100
 SIP or Multicast addressable
 All Call thousands of units with Valcom
Gateway
 Red LED status indicator
 Brushed stainless steel faceplate
 Auxiliary relay (strobe or camera activation)
 Compatible with secure networks
 Supervision with alert functions
 Web-based firmware upgradeable
 Web Interface For Control And Setup DHCP
 High Survivability –No Server Needed
Vandal Resistant and Tamper-Proof Hardware
IP HANDSFREE CALL STATION
VE9894-1-Finish (Single Button)
VE9894-2-Finish (Two Button)
VE9894-3-Finish (Three Button)
VE9894-4-Finish (Four Button)
Speaker
3.5" dia.
Mounting
Surface Mount
Speaker Output
100dB @ 4' on-axis
Switches
Single Pole Momentary Contact
Power
Extend: 24 VDC @ 325 ma
POE: 802.3af, class 3
Auxiliary Relay
Form C Contact
Contact Rating: 24VDC 2Amp
Networking
10/100 Mbps Ethernet port
Manual or Dynamic Host Configuration Protocol
(DHCP) IP address setup.
Time and date synchronization using SNTP
Protocols
IETF SIP (RFC3261)
IETF IGMP version 3 (RFC3376)
IETF RTP (RFC1889)
IETF RFC2833
Digest Authentication
* Other protocols available upon request
1
Issue 1
947786

Advertisement

loading

Summary of Contents for Valcom VE9894-1-Finish

  • Page 1: Specifications

    Speaker address, PC softphone, Valcom intercom station or 3.5" dia. to a Valcom IP gateway. At the time of activation a call status LED begins to flash. When the call is Mounting answered the call status LED remains “ON”. When...
  • Page 2 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.

This manual is also suitable for:

Ve9894-2-finishVe9894-3-finishVe9894-4-finish