VSG-1200 User's Guide
5.3.2 Example 2: Many-to-One
The figure below shows an example where the two subscribers S1 and S2 try to establish a
secure VPN connection to VPN servers V1 and V2 respectively at the same time. In this case,
the VSG performs Many-to-One IP address translation on the WAN since the destination
address is different.
Figure 25 NAT Example: Many-to-One
The following table shows the address mapping.
Table 14 NAT Example: Many-to-One
SUBSCRIBER
S1
S2
5.3.3 Example 3: One-to-One and Many-to-One
The figure below shows an example where subscriber S1 tires to connect to VPN server V1
while subscriber S2 and S3 try to connect to the same VPN server V2 at the same time. In this
case, subscribers S1 and S2 map to the same WAN IP address since the destination is different
while subscriber S3 maps to a different WAN IP address.
Figure 26 NAT Example: One-to-One and Many-to-One
The following table shows the address mapping.
68
ORIGINAL SOURCE IP TRANSLATED SOURCE IP
10.59.1.2
211.21.21.2
10.59.1.3
211.21.21.2
Chapter 5 NAT Pool