Preset Locations - Vivotek PZ6114 User Manual

[...]
PTZEnabled=<PTZ status>\r\n
Where the <PTZ status> is a 32-bits integer, each bit can be set separately as follows:
Bit 0 => Support camera control function 0(not support), 1(support)
Bit 1 => Build-in or external camera. 0(external), 1(build-in)
Bit 2 => Support pan operation. 0(not support), 1(support)
Bit 3 => Support tilt operation. 0(not support), 1(support)
Bit 4 => Support zoom operation. 0(not support), 1(support)
Bit 5 => Support focus operation. 0(not support), 1(support)

Preset Locations

Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/preset.cgi?
[addpos=<value>][&delpos=<value>][&return=<return page>]
parameter value
addpos <Text string less
than
characters>
delpos <Text string less
than
characters>
return <return page>
description
Add one preset location to preset list.
30
Delete preset location from preset list.
30
Redirect to the page <return page> after the
parameter is assigned. The <return page> can be
a full URL path or relative path according to the
current path. If you omit this parameter, it will
redirect to an empty page.
- 88 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532