Modifications For An Armoire Kit Installation; Top Grille; Install Refrigerator; Install Grille Panel - Jenn-Air JS42NXFXDW Installation Instructions Manual

MODIFICATIONS FOR AN ARMOIRE KIT INSTALLATION

Top Grille

1. Remove the four screws fastening each mounting plate to the
sides of the refrigerator. Discard the mounting plates but keep
the screws for attaching the two grille bracket assemblies
provided in this kit.
2. Remove the two screws fastening the air divider to the unit
housing. Discard the air divider, but replace the screws into
the holes from where they were removed.
A
A. Grille bracket mounting plate
B. Air divider
C. Grille bracket mounting plate
3. Align the four holes in a grille bracket assembly with the four
holes in a cabinet side, as shown. Using the screws removed
in Step 1, attach the grille bracket assembly.
B
A. Grille bracket assembly
B. Screws
4. Repeat steps 2 and 3 to install the other grille bracket
assembly to the opposite side of the refrigerator.
8
IMPORTANT: Follow the "Installation Instructions" in the
"Installation Guide" provided with your refrigerator.
1. Plug refrigerator into grounded 3 prong outlet.
B
C
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
2. Move the refrigerator to its final location.
1. Position the armoire grille panel between the grille brackets on
each side of the cabinet.
2. Slide the grille panel down until the top of the grille panel
hangs on top of the offsets of the grille brackets.
A

Install Refrigerator

WARNING
Tip Over Hazard

Install Grille Panel

A
D
A. Offset in bracket C. Grille bracket
B. Grille D. Grille bracket assembly
B
C