Table of Contents
Advertisement
7. Typical Connection
< For movie recording using a digital camera (DSLR) with audio input >
MIC INPUT, etc.
Microphone
OUTPUT
(UNBAL)
* If the audio input level of DSLR is fixed to MIC level, set the AR501
ATT switch to ATT position. Refer to the DSLR owner's manual for
the details.
* When using a line level source such as an audio mixer and wishing
to convert the output from BALANCED to UNBALANCED by AR501,
set the INPUT SEL switch to LINE.
< Connection with an audio mixer >
To be used as a microphone amplifier and to avoid external noise
when the microphone and audio mixer are located apart.
Usage example
* To connect the microphone located on the stage or ceiling of hall to
the mixer.
* For relay broadcasting at a sport event.
(A waterproof countermeasure needs to be taken on AR501 when us-
ing at outdoor.)
* In the electrically noisy environment such as with large lighting facil-
ity.
21
Advertisement
Table of Contents
