Advertisement
INPUT CONNECTIONS
There are two XLR type (unbalanced) input connectors on the rear of the unit. One is "male"
and the other is "female" plus two parallel phone jacks.
The internal wiring of XLR type connectors are follows.
male
female
Hot
BRIDGE MODE (MONO)
Follow the same procedure as outlined for 2-Channel (STEREO) mode, but use only one
shielded cable plugged into the CHANNEL-1 input. Do not connect anything to the
CHANNEL-2 input.
Note:
If you want to operate the bridge mode with making connections both CHANNEL-1 and -2
inputs, leave the Level Control of CHANNEL-2 in the fully counterclockwise (-o^dB) position
during the MONO operation.
9
Advertisement
