Runco VX-5000d Owner's Operating Manual page 32

Vx-5000d projector dhd controller

Hide thumbs Also See for VX-5000d:

Table of Contents

Step 5:

Remove the Lens and Motor Assembly by

pulling forward and to the left in order to

clear the Projector chassis with the Motor

Assembly.

Install New Lens Assembly

Step 6:

Install new Lens Assembly in reverse

order. Make sure to route the wire harness

(Item 4) in original position and away from

moving lens stages and Motor Assembly to

prevent unexpected disconnect or lens

damage. --See Figure 6 Below--

VX-5000d Projector (front view) with Lens Assembly

completely removed.

Figure 4

Figure 5

Figure 6

Table of Contents