Formatting - JVC SR-HD1700US Instructions Manual

Dubbing/Importing

Formatting

Unused discs or SD cards may require formatting in some
cases.
When the need arises, format the disc or SD card
accordingly.
Memo:
Formatting a disc or SD card erases all existing data from
the media.
Double-check carefully before formatting so as not to erase
important titles.
Format chart
Refer to the following chart for the disc types and format
when formatting a disc.
Note:
If a disc is formatted using an equipment not manufactured
by JVC, the disc may not be read correctly even though it
corresponds to the chart below.
In this case, reformat the disc using this unit, or make use
of another blank disc.
Memo:
BD-R and DVD-R discs can only be formatted once.
When a disc is re-formatted into another format, remove
the disc and load it again.
DVD format chart
Format
DVD-RW Single-sided, single
layer (4.7 GB)
DVD-R Single-sided, single
layer (4.7 GB)
Single-sided, dual
layer (8.5 GB)
ü : Format supported.
BD format chart
BD-RE Single-sided, single
layer (25 GB)
Single-sided, dual
layer (50 GB)
BD-R Single-sided, single
layer (25 GB)
Single-sided, dual
layer (50 GB)
ü : Format supported.
28
VR Video
Format Format
ü ü
ü ü
ü ü
BDAV BDMV
Format Format
ü ü
ü ü
ü ü
ü ü
Formatting a disc
1 Set the DVD or BD to be formatted on the disc
tray
2 Press the [MEDIA MANAGE] button on the
remote control unit
The Media Management menu screen appears.
3 Select "FORMAT" from "BD/DVD"
A format selection screen appears.
4 Select a format mode from the format selection
screen
DVD : Select a "Format mode" from "VR MODE" or "VIDEO
MODE".
: Select a "Format mode" from "BDAV MODE" or
BD
"BDMV MODE".
Memo:
When "BDMV MODE" is selected, a "FOR DIRECT
RECORDING" or "FOR DUBBING" selection screen
appears after "Format mode" is selected.
To record directly to a BDMV format disc, select "FOR
DIRECT RECORDING".
To use a BDMV format disc for purposes other than direct
recording, select "FOR DUBBING".