Cisco IOS XE Intelligent Services Configuration Manual page 8

Documentation Organization
Table 1 Cisco IOS XE Configuration Guides and Command References (continued)
Configuration Guide and Command Reference Titles
Cisco IOS XE DECnet Configuration Guide
•
Cisco IOS DECnet Command Reference
•
• Cisco IOS XE Dial Technologies Configuration Guide
• Cisco IOS Dial Technologies Command Reference
Cisco IOS XE High Availability Configuration Guide
•
• Cisco IOS High Availability Command Reference
• Cisco IOS XE Intelligent Services Gateway
Configuration Guide
Cisco IOS Intelligent Services Gateway
•
Command Reference
• Cisco IOS XE Interface and Hardware Component
Configuration Guide
Cisco IOS Interface and Hardware Component
•
Command Reference
Cisco IOS XE IP Addressing Services
•
Configuration Guide
Cisco IOS IP Addressing Services
•
Command Reference
Cisco IOS XE IP Application Services
•
Configuration Guide
Cisco IOS IP Application Services
•
Command Reference
Cisco IOS XE IP Multicast Configuration Guide
•
Cisco IOS IP Multicast Command Reference
•
• Cisco IOS XE IP Routing: BFD Configuration Guide
• Cisco IOS XE IP Routing: BGP Configuration Guide
• Cisco IOS IP Routing: BGP Command Reference
Cisco IOS XE IP Routing: EIGRP
•
Configuration Guide
Cisco IOS IP Routing: EIGRP Command Reference
•
Cisco IOS XE IP Routing: ISIS Configuration Guide
•
Cisco IOS IP Routing: ISIS Command Reference
•
vi
Features/Protocols/Technologies
DECnet protocol.
Asynchronous communications, dial backup, dialer technology,
Multilink PPP (MLP), PPP, and virtual private dialup network
(VPDN).
A variety of high availability (HA) features and technologies
that are available for different network segments (from
enterprise access to service provider core) to facilitate creation
of end-to-end highly available networks. Cisco IOS HA features
and technologies can be categorized in three key areas:
system-level resiliency, network-level resiliency, and embedded
management for resiliency.
Subscriber identification, service and policy determination,
session creation, session policy enforcement, session life-cycle
management, accounting for access and service usage, and
session state monitoring.
LAN interfaces, logical interfaces, serial interfaces, virtual
interfaces, and interface configuration.
IP addressing, Address Resolution Protocol (ARP), Network
Address Translation (NAT), Domain Name System (DNS),
Dynamic Host Configuration Protocol (DHCP), and Next Hop
Address Resolution Protocol (NHRP).
Enhanced Object Tracking (EOT), Gateway Load Balancing
Protocol (GLBP), Hot Standby Router Protocol (HSRP), IP
Services, TCP, Web Cache Communication Protocol (WCCP),
User Datagram Protocol (UDP), and Virtual Router Redundancy
Protocol (VRRP).
Protocol Independent Multicast (PIM) sparse mode (PIM-SM),
bidirectional PIM (bidir-PIM), Source Specific Multicast
(SSM), Multicast Source Discovery Protocol (MSDP), Internet
Group Management Protocol (IGMP), and Multicast VPN
(MVPN).
Bidirectional forwarding detection (BFD).
Border Gateway Protocol (BGP), multiprotocol BGP,
multiprotocol BGP extensions for IP multicast.
Enhanced Interior Gateway Routing Protocol (EIGRP).
Intermediate System-to-Intermediate System (IS-IS).
About Cisco IOS XE Software Documentation