Cisco IOS XE Intelligent Services Configuration Manual page 7

About Cisco IOS XE Software Documentation
Configuration Guides, Command References, and Supplementary Resources
Table 1
command references, including brief descriptions of the contents of the documents. The command
references contain commands for both Cisco IOS software and Cisco IOS XE software, for all releases.
The command references support many different software releases and platforms. Your Cisco IOS XE
software release or platform may not support all these technologies.
Table 2
and command references. These supplementary resources include release notes and caveats; master
command lists; new, modified, removed, and replaced command lists; system messages; and the debug
command reference.
For additional information about configuring and operating specific networking devices, and to access
Cisco IOS documentation, go to the Product/Technologies Support area of Cisco.com at the following
location:
http://www.cisco.com/go/techdocs
Table 1 Cisco IOS XE Configuration Guides and Command References
Configuration Guide and Command Reference Titles
Cisco ASR 1000 Series Aggregation Services Routers
•
SIP and SPA Software Configuration Guide
Cisco ASR 1000 Series Aggregation Services Routers
•
Software Configuration Guide
Cisco IOS XE Access Node Control Protocol
•
Configuration Guide
Cisco IOS Access Node Control Protocol
•
Command Reference
Cisco IOS XE Asynchronous Transfer Mode
•
Configuration Guide
Cisco IOS Asynchronous Transfer Mode
•
Command Reference
Cisco IOS XE Broadband Access Aggregation and DSL
•
Configuration Guide
Cisco IOS Broadband Access Aggregation and DSL
•
Command Reference
Cisco IOS XE Carrier Ethernet Configuration Guide
•
Cisco IOS Carrier Ethernet Command Reference
•
Cisco IOS XE Configuration Fundamentals
•
Configuration Guide
Cisco IOS Configuration Fundamentals
•
Command Reference
lists, in alphabetical order, Cisco IOS XE software configuration guides and
lists documents and resources that supplement the Cisco IOS XE software configuration guides
Features/Protocols/Technologies
Configuration and troubleshooting of SPA interface processors
(SIPs) and shared port adapters (SPAs) that are supported on the
Cisco ASR 1000 Series Router.
Overview of software functionality that is specific to the
Cisco ASR 1000 Series Aggregation Services Routers.
Communication protocol between digital subscriber line access
multiplexers (DSLAMs) and a broadband remote access server
(BRAS).
LAN ATM, multiprotocol over ATM (MPoA), and WAN ATM.
PPP over Ethernet (PPPoE).
IEEE 802.3ad Link Bundling; Link Aggregation Control
Protocol (LACP) support for Ethernet and Gigabit Ethernet links
and EtherChannel bundles; LACP support for stateful
switchover (SSO), in service software upgrade (ISSU), Cisco
nonstop forwarding (NSF), and nonstop routing (NSR) on
Gigabit EtherChannel bundles; and IEEE 802.3ad Link
Aggregation MIB.
Autoinstall, Setup, Cisco IOS command-line interface (CLI),
Cisco IOS file system (IFS), Cisco IOS web browser user
interface (UI), basic file transfer services, and file management.
Documentation Organization
v