Warranty - Century 400 Ninja 10070610 Operating Instructions Manual

Limited Warranty
CENTURY 400 warrants new machines against defects in material and workmanship under normal use and service to the original
purchaser. Any statutory implied warranties, including any warranty of merchantability or fitness for a particular purpose, are
expressly limited to the duration of this written warranty. CENTURY 400 will not be liable for any other damages, including but not
limited to indirect or special consequential damages arising out of or in connection with the furnishing, performance, use or inability
to use the machine. This remedy shall be the exclusive remedy of the buyer. The warranty period is subject to the conditions stated
below.
Warranty: Ten Years Polyethylene (PE) Housings, 1 Year Parts,
Subject to conditions outlined below, CENTURY 400 warrants rotationally molded PE housings on all of its machines to be free from
defects in material and workmanship, under normal use and service for ten (10) years to the original owner.
Under this warranty we guarantee the performance of non-polyethylene parts and components to be free from defects for up to one (1)
year to the original end user. Parts replaced or repaired under this warranty are guaranteed for the remainder of the original warranty
period. (See table below)
Service labor charges are covered for up to ninety (90) days from the date of purchase through authorized Windsor service provider.
No travel coverage is extended for cord-electric models. See table below for each general product model warranty coverage.
Product
Ninja, Sensei, Spot Plus,
Hurricane and Turbo Mist
Polishers / Elec. Burnishers
All others
UPV12 Upright Vacuum
Product exceptions and Exclusions:
•
Extractor brush motors, pump motors. ALL PC boards and electronics, ALL Vacuum motors (Except UPV12). ALL pumps carry
a one (1) year parts warranty.
•
Improper use of chemicals voids warranty and Century 400's liability. Defoamer is to be used in recovery tank of all Century 400
machines. Dry cleaning solvents cannot be used in any Century 400 equipment, if used fire and/or pump damage could result.
White vinegar should be pumped through the machine once each week to prevent mineral sealing.
Normal wear items and accessories including, but not limited to, carbon brushes, castors, clutches, cords, filters, finishes, gaskets,
hoses light bulbs, rectifiers, switches, squeegees, bearings, pulleys, relays, actuating cables, wheels, tires, quick disconnects, o-rings,
seals, diaphragms, thermostats, and brass fittings will be warranted for manufacturing defects for 90-days from the purchase date for
parts only.
90 day unlimited warranty:
Any equipment that fails due to a manufacturing defect within the first 90 days from date of purchase will have an unlimited warranty,
which includes parts, standard freight, and labor. Labor or freight will not be covered after 90 days from the date of purchase.
The warranty commences on the purchase date by the original end user from an authorized Century 400 agent, subject to proof of
purchase. The machine Registration Card must be completed and returned immediately at the time of purchase. If proof of purchase
cannot be identified, the warranty start date is 90 days after the date of sale to an authorized Century 400 distributor. Parts replaced or
repaired under warranty are guaranteed for the remainder of the original warranty period.
Century 400, reserves the right to change its warranty policy without notice – 86039960-B PRV NO 98868 10/17/08
. ●
1351 W. Stanford Ave., Englewood, CO 80110 ● (303) 762-1800 ● 800-444-7654 ● FAX (303) 865-2794
Century 400 Inc
New Machine Warranty
PE Housing & Parts
10 years
-
5 years
Vacuum motor, belts – 2 years
Non-PE Parts
1 year
3 years
1 year
All other parts 1 year
Service Labor Travel
90days None
90days None
90days None
90days None
1 of 2