Proper Care Of Collet; Environmental Protection - Ryobi EVT350RG Owner's Operating Manual

when sharpening the end of a cutter to grind the
Clearance angle the same as originally ground.

PROPER CARE OF COLLET

From time to time, it also becomes necessary to clean
your collet and collet nut. To do so, simply remove collet
nut from the collet and clean the dust and chips that have
collected. Then return the collet nut to its original position.
GENERAL
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Do not at anytime let brake fl uids, fuel, petroleum-
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Use clean cloths to remove dirt, carbon dust, etc. When
electric tools are used on fi breglass boats, sports cars,
wallboard, spackling compounds or plaster, it has been
found that they are subject to accelerated wear and
possible premature failure, as the fi berglass chips and
grindings are highly abrasive to bearings, brushes,
commutators, etc. Consequently it is not recommended
that this tool be used for extended work on any fi berglass
material, wallboard, spackling compounds or plaster.
During any use on these materials, it is extremely
important that the tool is cleaned frequently by blowing
with an air jet.
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
LUBRICATION
All of the bearings in this tool are lubricated with a
suffi cient amount of high grade lubricant for the life of
the unit under normal operating conditions. Therefore, no
further lubrication is required.
WARNING
WARNING
English

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
5
Safety alert
Double insulation
Read the instructions carefully before
starting the machine.