Hitachi C75T Safety Instructions And Instruction Manual page 17

6. Adjusting the base and saw blade to
maintain perpendicularity
The angle between the base and the saw blade
has been adjusted to 90°, however should this
perpendicularity be lost for some reason,
adjust in the following manner.
1) urn the base face up (Fig. 21) and loosen the
ing bolt.
2) pply a square to the base and the saw blade
nd, turning the screw with screwdriver, shift
he position of the base to produce the desired
ight angle. (Fig. 22)
7. Service parts list
CAUTION:
Repair, modification and inspection of Hitachi Power Tools must be carried out by an
Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service
Center when requesting repair or other maintenance. In the operation and maintenance
of power tools, the safety regulations and standards prescribed in each country must
be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved and modified to incorporate the latest
technological advancements.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior
notice.
English
Square
Base
Fig. 21
Screw
Fig. 22
17