Lenovo ThinkCentre 3231 Hardware Maintenance Manual page 61

Diagnostic Error Code
000-034-XXX
BIOS Buffer Allocation failure
000-035-XXX
BIOS Reset Condition detected
000-036-XXX
BIOS Register error
000-038-XXX
BIOS Extension failure
000-039-XXX
BIOS DMI data error
000-195-XXX
BIOS Test aborted by user
000-196-XXX
BIOS test halt, error threshold exceeded
000-197-XXX
BIOS test warning
000-198-XXX
BIOS test aborted
000-199-XXX
BIOS test failed, cause unknown
FRU/Action
1. Reboot the system
2. Flash the system. See "Updating
(flashing) BIOS from a disc" on page 746
3. Run memory test
4. System board
1. Flash the system. See "Updating
(flashing) BIOS from a disc" on page
746
2. System board
1. Flash the system. See "Updating
(flashing) BIOS from a disc" on page
746
2. System board
1. Flash the system. See "Updating
(flashing) BIOS from a disc" on page
746
2. Adapter card
3. System board
1. Flash the system. See "Updating
(flashing) BIOS from a disc" on page
746
2. System board
Information only
Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, "Using the Setup Utility," on
page 49
2. Re-run test
3. Replace the component that is called out
in warning statement
4. Replace the component under test
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, "Using the Setup Utility," on
page 49
2. Flash the system and retest. See
"Updating (flashing) BIOS from a disc"
on page 746
3. Go to "Undetermined problems" on page
80
1. Go to "Undetermined problems" on page
80
2. Flash the system and re-test
3. Replace component under function test
Chapter 7. Symptom-to-FRU index
55