Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Viking F20921B
Summary of Contents for Viking F20921B
- Page 1 Viking Use/Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-(845-4641) or visit the Viking website at vikingrange.com Outdoor 15” Wide Double Side Burners F20921B EN (070113)
-
Page 2: Important: Please Read And Follow
SAFETY TIPS IMPORTANT: PLEASE READ AND FOLLOW •Keep outdoor cooking appliance area free from combustible materials, gasoline and other flammable vapors and 1. Before beginning, please read these instructions completely and carefully. liquids. 2. Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty •Keep ventilation openings at the rear of the cart and cylinder free and clear to allow proper air flow. - Page 3 DO NOT forget to place the installer supplied gas valve in an accessible location. NOTE: If using a Viking GSH12 flexible hose, remove the 3/8” flare adapter and attach hose to the the 1/2” (1.3 cm) male flare on the regulator assembly.
-
Page 4: Leak Testing
LP/Propane Tank Connection LEAK TESTING Outdoor side burners orificed for use with LP/Propane gas come equipped with a high capacity hose/regulator assembly Although all gas connections on the unit are leak tested at the factory prior to shipment, a complete gas tightness check must for connection to a standard 20 lb. -
Page 5: Front View
INSTALLATION PROCEDURES FOR BUILT-IN Built-In Clearance Dimensions – VGSB5152 INSTALLATION 1. A minimum of 6” (15.2 cm) from the sides must be maintained from the side burners above the cooking surface to adjacent vertical combustible construction. The unit is not to be located under overhead unprotected combustible construction. Front View 2. - Page 6 BURNER ADJUSTMENT– VGSB5152 VENTILATION FOR BUILT-IN INSTALLATIONS Each burner is tested and adjusted at the factory prior to shipment; however, variations in the local gas supply may make it necessary to adjust the burners. The flames of the burners should be visually checked and compared with flame height illustration.
-
Page 7: Performance Checklist
PERFORMANCE CHECKLIST Cleaning and Maintenance A qualified installer should carry out the following checks: Removing Side Burners for Cleaning 1. All internal packaging removed. 2. Specified clearances maintained to combustible materials. 3. Pressure regulator connected and set. 4. Manual shut-off valve installed and accessible. 5. -
Page 8: Service Information
If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, permanently discolor stainless steel. Wipe up any spills immediately. contact Viking Range, LLC at (888) 845-4641 or write to: •Do not use abrasive cleaners, steel wool pads, or abrasive cloths on stainless steel parts. -
Page 9: Warranty
(2) years from the date of original retail purchase or closing date for new construction, whichever period is longer.. Viking Range, LLC, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period.