Table of Contents
Advertisement
Removal
1. Unplug lamp from power source and,
if necessary, allow time for the bulb to
cool.
2. Hold the metal lamp shade and turn
it counterclockwise. (See Fig. 1.)
Carefully pull the shade over the bulb
and set the shade aside.
3. Hold the lamp and twist the bulb
counterclockwise, as you would a
conventional light bulb.
Installation
1. Unplug lamp from power source.
2. Hold the lamp and align the two pins
on the bottom of the bulb with the
corresponding openings in the bulb
base. (Either pin in either opening is
fine. See Fig. 2.)
CAUTION:
CAUTION:
replacement or installation.
VC02-MAN-Rev6.indd 7
Job#: 0.0637
Date: 01/29/13
Bulb Replacement Instructions
Always unplug lamp before performing bulb
Title: VC02 Manual Update
Version: Rev6
Fig. 1
Fig. 2
7
1/30/13 12:40 PM
Advertisement
Table of Contents
