Verilux SmartLight VC02 Instructions Manual page 4

Important Safeguards — continued
product or device into a different outlet or move the lamp out of the line of
sight of the remote control receiver.
• If this lamp has been damaged in any way, for example, the power supply
cord or plug has been damaged, liquid has been spilled or objects have
fallen onto the lamp, the lamp has been exposed to rain or moisture, the
lamp does not operate normally or has been dropped, it should not be
operated. There are no user serviceable parts in this lamp.
• Unplug lamp during lightning storms or when unused for extended periods
of time.
• Use only the type of bulb and maximum wattage indicated by Verilux.
• Use the vertical shaft to lift the lamp.
• Protect the power cord from being walked on or pinched, particularly at the
plugs, convenience receptacles and the point where the power cord exits
the the lamps.
• Never cover the lamp or place anything on top of it when it is in operation.
• Do not use solvents or cleaners containing abrasives, or ammonia based
cleaners on this product.
• After cleaning the lamp, all moisture should be properly wiped away and
dried before restoring power.
• Do NOT use lubricating agent in assembly; please see troubleshooting
section if you are having difficulty assembling your lamp.
• Disconnect lamp before performing alignment activity.
• Dispose of bulbs per local regulations. For more information on clean-up
and disposal, see www.epa.gov/cfl.
VC02-MAN-Rev6.indd 4
CAUTION:
— continued
SAVE THESE INSTRUCTIONS
4
1/30/13 12:40 PM