TP-Link TD-8816 User Manual page 24

ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path

Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup
8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
need to activate the VC (Virtual Circuit) to take effect. For PVCs management, you can use
ATM QoS to setup each PVC traffic line's priority.

Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.

PVCs Summary: Click the button, you can view the summary information about the
PVCs.

Status: If you want to use a designed VC, you should activate it.

VPI: Identifies the virtual path between endpoints in an ATM network. The valid range is
from 0 to 255. Please input the value provided by your ISP.
TD-8816 ADSL2+ Modem Router User Guide
Figure 4-6
17