L2 Managed Switch
19
Configuration
6.
Type the User name and Password in the Hyper Terminal window, the factory default
value for both of them is admin. The DOS prompt" TP-LINK>" will appear after
pressing the Enter button as Figure 5-8 shown. It indicates that you can use the CLI
now.
Logon by Telnet
■
To log on to the switch by a Telnet connection, please take the following steps:
1.
Make sure the switch and the PC are in the same LAN.
2.
Click Start
→Run to open the Run window.
Figure 5-7
Port Settings
Figure 5-8
Log in the Switch