Kenmore 587.1536 Series Use & Care Manual page 7

Operating Instructions
Status Indicator Lights
The WASHING light comes on at the beginning of cycle
and remains on until the end of the final rinse.
The DRYING light indicates the drying portion of the cycle.
The light will come on when either drying option is se-
lected.
The CLEAN light will come on at end of cycle and remain
on until door is opened.
Option Selections
Hi Temp Wash Option
When HI TEMP WASH option is selected the dishwasher
adds temperature, time, and water to the cycle. The
dishwasher heats the water in the main wash to
approximately 140°F (60°C). The hotter water provided
by this option helps activate dishwasher detergent to clean
food grease and soil from dishes.
When HI TEMP WASH option is selected, the light above
the pad will come on and remain on until end of cycle. To
turn off the HI TEMP WASH option, press the pad a
second time. The light above the pad will turn off.
To turn off the HI TEMP option, press the pad a second
time. The light above the pad will turn off.
Heat Dry Option
The HEAT DRY option in combination with rinse aid will
give you excellent drying results. The energy to use HEAT
DRY costs pennies per cycle. You may turn off the HEAT
DRY option, however you will have items in your dish load
that will not be dry at the end of the cycle.
With either option, you may see water vapor coming from
vent during the drying portion of the cycle. Some models
have a vent that is closed during washing to hold moisture
and sound inside and then opens for drying.
To turn off the HEAT DRY option, press the pad a second
time. The light above the pad will turn off.
The drying option may be changed at any time during the
cycle and affects only the drying period.
Delay Start
The DELAY START option allows you to automatically
delay starting your dishwasher from 2-4 or 2-4-6 hours
depending on your model.
On models with 2-4-6 hour delay, press the pad once for a
2 hour delay, twice for 4 hours and three times for 6 hours.
A light will come on indicating the delay start hours and
will remain on until cycle starts.
To cancel the DELAY START option and begin the cycle
before the delay period is over, press the START/CANCEL
pad.
Child Lock Controls
To prevent children from accidently changing the dish-
washer cycle or starting the dishwasher, lock the dish-
washer controls by pressing and releasing the HEAT DRY
pad for 3 seconds while the door is latched. An indicator
light on the lock graphic pad will illuminate when the
controls are locked and no new selections can be made
until the lock is released. To unlock the controls, press the
HEAT DRY pad until the indicator light goes out.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 90
second drain. At the end of the drain, select the desired
cycle.
7