Setting The Projector Id - Epson EB-D6250 User Manual

Projection Functions
You can set an ID for the remote control within a range of "0" to "9". The
default value is "0". The following table shows the possible combinations of
Projector ID and remote control ID.
Opera-
Combinations
tion
Possible Projector ID: 1
Remote control ID: 1
Possible Projector ID: Off
Remote control ID: 1
Possible Projector ID: 1
Remote control ID: 0
Not possi‐ Projector ID: 1
ble
Remote control ID: 3

Setting the Projector ID

Descriptions
The projector ID and the
remote control ID are
identical, therefore you can
operate the projector with the
remote control.
When the Projector ID is Off,
you can operate with the
remote control regardless of
the remote control ID setting.
When the remote control ID
is "0", you can operate with
the remote control regardless
of the Projector ID setting.
The Projector ID and the
remote control ID do not
match, therefore you cannot
operate the projector with the
remote control.
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
Using Remote Control
b
Select Projector ID from Extended.
c
Choose the ID you want to set and press the [Enter] button.
52
p.62
Using the Control Panel