Chapter 3: How To Clone Tv; Cloning - RCA J32LED750 User Manual

Chapter 3: How to clone TV

After you set up one television, you can copy the settings onto a USB stick and apply them to your other tele-
visions.
You will need a properly configured USB Memory stick to learn the settings from your television.
Contact RCA Commercial Distribution(1-800-RCA-2161) to obtain an RCA USB Memory stick, or setup your
own memory stick by following the "Configuring your memory stick" section below.
Configuring your memory stick:
To set up a USB key to you need to create a directory (folder) on the USB stick called CMSTDF.
1. Plug a USB key into the USB port of your PC.
2. Open Windows Explorer
3. Right Click on the USB drive in Windows Explorer and select "New" followed by "Folder."
4. Name the folder, "CMSTDF."
Copying settings out of television:
1. Press the MENU button to enter the on-screen
menu.
2. Press the Down or Up button to select the Setup
sub-menu and then press the OK button.
3. Press the Down or Up button to select the
Firmware Upgrade sub-menu and then press the
OK button.
4. Press the Right button to choose Save Settings to
USB and then press the Right button.
5. Edit filename by pressing Up/Down/Left/Right keys.
6. Press the Up key to write settings to the USB stick
Settings will be copied to USB drive.
24
Cloning Main Menu
Restore Settings to TV
Save Settings to USB
Upload Firmware to TV
Information
Exit Move Next
Save Settings to USB
Source Model : DM-931KA
File Name Edit:
J 3 2
Back Adjust Next
Save Settings to USB
Save Settings from TV
to J32LED--.tdf file in USB?
Back Yes No
Save Settings to USB
Settings saved from TV
to J32LED--.tdf file in USB
Back
G G
Chapter 3