BandLuxe R300 Series User Manual page 6

7 Power Receptor
8 UMTS LED
9 Roaming LED
10 WLAN LED
11 Ethernet LED
12 DIAG LED
13 Power LED
14 3G Radio On/Off &
Signal Strength
Button
15 3G Radio Signal
Strength Indicator
Table for UMTS and DIAG LED:
Operation status
Error in Router
Fail to boot module
No SIM exist
Waiting for PIN entering
No network/Searching for network
3G camped
3G connected
Note: Pink for UMTS LED is available by product if 2G is available.
5
Receptor for the Power Adaptor.
Reference below table.
Solid light shows the Router is connecting to
Roaming network.
Solid light indicates that the wireless segment is
ready.
Flashing light shows that data is being
transmitted via WLAN.
Solid light shows that an Ethernet-enabled
computer is connected via the LAN port but no
data is being transmitted.
Flashing light shows that data is being
transmitted via LAN.
Reference below table.
Solid light indicates that the power supply is
connected properly.
Short press – Enable Signal Strength indication
for 3 sec.
Long press (>5 sec) – 3G radio on/off
Indicates the 3G signal strength when 3G Radio
button is in short press.
UMTS
OFF
Solid Red
Flashing Red
Flashing Red
Flashing Red
Flashing Green/Pink
Solid Blue/Green/Pink
Package Contents
DIAG
Solid
Flashing
OFF
OFF
OFF
OFF
OFF