VoltPAQ X2 & X4 User Manual
5. Cables
4-Pin DIN to 6-Pin DIN
This cable connects the VoltPAQ output to
the desired load.
Figure 3: 4-pin DIN to 6-pin DIN
RCA-to-RCA
RCA-to-RCA cables connect the "Amplifier
Command" and the "Current Sense" to a data
acquisition board.
Figure 4: RCA-to-RCA cable
E-Stop
The E-Stop must be plugged into the X2 or X4
unit for proper operation.
Figure 5: E-Stop Button
Document Number: 903 Revision: 1.5 Page: 6