VoltPAQ X2 & X4 User Manual
Figure 9: Backside of VoltPAQ-X4 has 4 fuses.
There is one fuse per channel. So, for example, in the VoltPAQ-X2, there are 2 fuses. If
your voltage input is 100-132 VAC use the following fuses: Slow Blow 1.5A – Digikey part
number F2551-ND.
If your voltage input is 200VAC-240VAC use the following fuses: Slow Blow 1A –
Digikey part number F2543-ND
Remove the existing fuse by pushing inward and turning the fuse approximately 90 degrees,
then pull the cap out. Replace the fuse, push back in and twist to lock.
Document Number: 903 Revision: 1.5 Page: 9