Smart zoom does not function.
Set [Digital Zoom] to [Smart] (page 43).
•
•
This function cannot be used when:
The image size is set to [6M] or [3:2].
–
Shooting in Multi Burst mode.
–
Shooting movies.
–
The flash does not work.
The flash is set to
•
You cannot use the flash when:
•
[Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 31).
–
(High sensitivity mode) or
–
Set the flash to
•
mode) or
Indistinct, round blobs are visible on images when the flash is used.
•
Strong light from the flash has been reflected from dust or airborne particles. This
phenomenon is not a malfunction.
The date and time are recorded incorrectly.
Set the correct date and time (t step 2 in "Read This First").
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 28).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(t step 5 in "Read This First") or adjust the exposure (page 28).
Turn on the screen (page 20).
•
The image is too bright.
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
exposure (page 28).
The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 33).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
78
(No flash) (t step 5 in "Read This First").
(Twilight mode) of the Scene mode, or
(Forced flash) to shoot still images when
(Landscape mode) is selected in the Scene mode.
is selected.
(Snow mode),
(Beach