Sony Cyber-Shot DSC-S600 Service Manual page 161

5. Data Save Error
Symptom
data cannot be saved normally. (The data set-
ting during adjustment cannot be cancelled)
• Data writing to the flash memory failed.
Cause
• Connection is faulty.
• Power supply is not installed correctly.
• On the SEUS Operation screen,
Remedy
• Check the connection.
• Install the power supply correctly.
DSC-S600_ADJ
How to cancel the
data setting during
adjustment is
display here.
Fig. 6-1-41
to the pages and addresses displayed in the
[Save]
message, and them. (Cancel manu-
ally the data setting during adjustment.)
1-5-2.
The Automatic Adjustment Program sets the data for adjustment
before the adjustment starts. Accordingly, if the adjustment termi-
nates by an error, the data during the adjustment may be left in the
camera.
Note 1: With this data left in the camera, the camera will not
In this case, the
"red" on the screen as shown in Fig. 6-1-42 and 43. Click the
[Release Data Setting]
the data setting is cancelled, the button color becomes "white".
Note 2: When "Data Save Error" occurred, the
Camera System Adjustment screen
[Set]
the data
LCD System Adjustment screen
6-19
Precautions When an Error Occurred
operate normally.
[Release Data Setting]
button to cancel the data setting. When
Setting]
button is displayed in "white".
To cancel the data setting, perform it on the SEUS Op-
eration screen. How to cancel the data setting is displayed
in the error message.
Fig. 6-1-42
Fig. 6-1-43
button is displayed in
[Release Data