Sony Cyber-Shot DSC-S600 Service Manual page 159

1-4-3. Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj. & EVR Data Write
2. V-COM Adj.
3. White Balance Adj.
4. Release of Data Setting during LCD Adj.
[Adjusting method]
[Start]
1) Click the
2) The Automatic Adjustment Program executes "1. Data Setting
during LCD Adj. & EVR Data Write"
3) Upon successful completion of the "1. Data setting during LCD
Adj. & EVR Data Write", the following message is displayed
during execution in "2. V-COM Adj. ". On the SEUS screen,
operate the UP/DOWN key so that the brightness of portions
A and B on the LCD panel is equal. After the adjustment, click
[OK]
the button.
4) Upon completion of "2. V-COM Adj.", "3. White Balance Adj."
is executed. The following message is displayed, and then check
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 42 and 43 on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
[OK]
5) If the button is clicked, "4. Release of Data Setting dur-
ing LCD Adj." will be executed.
6) Upon successful completion of all item the LCD Adjustment,
the following message is displayed. Click the
DSC-S600_ADJ
button of the LCD Adjustment.
Fig. 6-1-32
Fig. 6-1-33
[OK]
Fig. 6-1-34
SEUS operation screen
Check on the LCD screen (V-COM Adj.)
button.
6-17
UP/DOWN key
Fig. 6-1-35
A
B
Fig. 6-1-36