Establishing A Google Cloud Print Connection - Lantronix xPrintServer User Manual

Establishing a Google Cloud Print Connection

After performing
Print connection to a new xPrintServer unit. This connection does not need to be re-established
after the initial connection is made unless
performed.
Note: A Google account and up-to-date web browser are required for establishing a Google
Cloud Print connection. Since multiple Google account logins and passwords may be stored in a
browser maintaining "signed-in" status, it is recommended that you make sure to log out of all
Google accounts prior to beginning these steps. One way of doing this is by using the
incognito/privacy mode in a browser. This way you may select the desired Google account to be
used in establishing this Google Cloud Print connection. Only one Google account can be
associated with an xPrintServer unit at any time. If more than one account needs access to
xPrintServer admin functions, consider using a Google account that can be shared (see
a Printer through Google Cloud Print
the same wired or Wi-Fi network as your xPrintServer unit.
1. Login to the Admin interface of your xPrintServer device in one of two ways below. You will
need to access the QR code or serial number on the
xPrintServer device.

Scan the QR code on the
click the link displayed on your QR code reader to access the xPrintServer device Admin
interface where you may log in (see
Note: QR code readers are available for Android smartphones and tablets at the Google
Play™ store. Lantronix recommends using the ZXing™ Barcode Scanner™ app, which may
be found at https://play.google.com/store/apps/details?id=com.google.zxing.client.android.
OR

Type http://www.lantronix.com/findmyxprintserver
enter the alphanumeric serial number from the
accessed on a smartphone, tablet or PC. The serial number is alphanumeric and 12
characters in length. A login window in the xPrintServer device Admin interface will
appear for login (see
Lantronix® xPrintServer® User Guide
Hardware Installation Steps, follow these directions to register a Google Cloud
Service). Your device (smartphone/table/PC) must be on
Product Label
Figure 3-2 Login
Resetting the xPrintServer to Factory Defaults
Product Label
using your Android smartphone or tablet and
Figure 3-2 Login Prompt).
directly into a web browser and
Product Label. Web browsers can be
Prompt). ).
2: Installation
is
Sharing
on the underside of your
14