Ipei Code - Ericsson DT292 User Manual

Important
¦ Û Ü
z ¦ Ü Û
¦ Û Ü
Û Ü ¦
z ¦ Û Ü
z ¦ Û Ü
z ¦ Û Ü
8

IPEI code

If your phone is blocked because an incorrect PIN code has been
entered three times, you can unlock it with the IPEI code
(International Portable part Equipment Identity). After entering the
IPEI code, you must enter a new PIN code.
The IPEI code is a unique code which has been assigned to your
phone. The IPEI code can be found in the
If your phone is blocked,
phone must be unblocked before it can be used again.
To display the IPEI code
Route: Information » ShowIPEI
Select and press
ShowIPEI
: is displayed.
Enter PIN
Enter the PIN code for your phone (default 0000) and press
The 13-digit IPEI code is displayed.
Press to leave this menu
Note: Write down the IPEI code for future use. If you cannot
retrieve the IPEI code, please contact your system
administrator. Keep the IPEI code secret to prevent misuse
of your phone.
Un-block the DT292
Press
is displayed.
Backdoor:
Enter the IPEI code and press
is displayed.
EnterNewPIN:
Enter the four digits of the new PIN code and press
is displayed.
RepeatNewPIN
Enter the new PIN code again and press
Either
New PIN accepted
latter case, the new PIN and the code you have just entered do not
match. If
New PIN accepted
again.
ShowIPEI
PIN Blocked, Unblock?
or
Wrong New PIN
appears, you can use the phone
BusinessPhone – Cordless phone DT292
menu.
appears. The
is displayed. In the