HP Pavilion dv3 Maintenance And Service Manual page 80

Removal and replacement procedures
5. Remove the WLAN module 3 by pulling the module away from the slot at an angle.
✎
WLAN modules are designed with a notch 4 to prevent incorrect insertion of the WLAN module into
the WLAN module slot.
6. Turn the module over and remove the Phillips PM2.5×3.0 screw 1 that secures the bracket to the WLAN
module, and then remove the bracket from the WLAN module 2.
Reverse this procedure to install the WLAN module.
4–18 Maintenance and Service Guide