Microtek Digital Video Camera User Manual page 88

Troubleshooting
Images are
not saved in
memory.
Cannot trans-
fer images to
a computer
after connect-
ing the USB
cable.
Images do not
appear on the
television.
80
The camera was
turned off before the
image was stored in
memory.
The USB driver is not
installed.
•The cable is not con-
nected securely.
•The TV Out setting is
incorrect.
If the battery low
indicator appears on
the LCD screen,
replace the batteries
immediately.
•Install the USB
driver before you
connect the cam-
era to a computer.
•Turn the camera on.
•Use the included
video cable to con-
nect the camera to
a TV.
•Set the video sys-
tem to the correct
setting, NTSC or
PAL.