Driving; Before Starting; Starting The Engine - Husqvarna Rider ProFlex 21 Operator's Manual

Before starting

• Read the sections headed "Safety instructions"
and "Presentation" before starting the mower.
• Carry out daily maintenance before starting (see
"Maintenance \ Maintenance Schedule").
• Adjust the seat to the required position.

Starting the engine

1. Lift up the cutting unit by pulling the lever back-
wards to locked position (transport position) and
apply the parking brake.
2. Move the throttle control to the middle position.
3. If the engine is cold move the choke lever
backwards to its end position.
4. Turn the ignition key to the start position.

DRIVING

6007-201
6007-202
6007-203
6007-204
15
English –