Setting The Night Mode - Denon AVR-X500 Owner's Manual

Contents

Setting the Night mode

Compress dynamic range (difference between loud and soft sounds).
NIGHT
Front panel Display
Connections Playback
Rear panel
Settings
1
Press NIGHT.
The "NIGHT MODE" screen is displayed on the TV screen.
Low : Set the adjusted value to "Low".
Mid : Set the adjusted value to "Middle".
High : Set the adjusted value to "High".
Auto : Automatic dynamic range compression on/off control
according to the source.
Off : Not set.
%
• You can set "Auto" only for the Dolby TrueHD source.
• The default setting is "Off". When the input signal is Dolby TrueHD source, the
default setting is "Auto".
67
Remote
Tips Appendix
Index