Lithium-Ion Batteries - Skil 2364 Operating/Safety Instructions Manual

BM 1619X03886 07-09:BM 1619X03886 07-09 7/23/09 10:54 AM Page 6
Do not attempt to disas-
W RNING
semble the battery or
remove any component projecting from
the battery terminals. Fire or injury may
result. Prior to disposal, protect exposed
terminals with heavy insulating tape to
prevent shorting.

LITHIUM-ION BATTERIES

If equipped with a lithium-ion battery, the battery
must be collected, recycled or disposed of in
an environmentally sound manner.
"The EPA certified RBRC
Battery Recycling Seal on the
lithium-ion (Li-ion) battery
indicates Robert Bosch Tool
Corporation is voluntarily
participating in an industry
BATTERy REMOVAL INSTRUCTIONS
Run motor until battery is
C UTION
completely discharged before
attempting to remove battery from your tool.
1. Remove the eight (8) housing screws with a
flat blade screwdriver.
2. Remove housing cover by lifting upward
from front end of tool.
Battery Disposal
program to collect and recycle these batteries
at the end of their useful life, when taken out
of service in the United States or Canada. The
RBRC program provides a convenient
alterative to placing used Li-ion batteries into
the trash or the municipal waste stream, which
may be illegal in your area.
Please call 1-800-8-BATTERY for information
on Li-ion battery recycling and disposal
bans/restrictions in your area, or return your
batteries to a Skil/Bosch/Dremel Service
Center for recycling. Robert Bosch Tool
Corporation's involvement in this program is
part of our commitment to preserving our
environment and conserving our natural
resources."
Battery Disposal
3. Disconnect lead wires from switch.
4. Wrap heavy insulating tape around battery
terminals or enclose in a sealable plastic bag
to prevent possible shorting.
5. Dispose of battery through your local
waste removal authority or a Skil Service
Center.
-6-