HP d325 Series Quickspecs page 36

QuickSpecs
Technical Specifications – Optical Storage
48X/24X/48X CD-RW Drive (continued) Data Transfer Modes
DA-11642 North America — Version 7 — August 22, 2003
Cache Buffer
Start-up Time (single)
Start-up Time (multi-session) < 30 seconds typical
Stop Time
Power
Audio Output Level
Configuration Jumper Block Master, slave and cable select modes
Data Interface Connector
Environmental
(all conditions, non-condensing)
HP Business Desktop d325 Series
ATA PIO mode 4 (16.7MB/s) ; ATA multi-word DMA mode 2 (16.7 MB/s); ATA
UltraDMA mode 0 (16.7 MB/s) ;ATA UltraDMA mode 1 (24 MB/s) ; ATA
UltraDMA mode 2 (33 MB/s) – default.
2 MB (minimum)
< 7 seconds typical
< 4 seconds
Source
DC power requirement
DC current
0.7 Vrms
50-pin IDE interface
Temperature (operating)
Relative Humidity (operating)
Maximum Wet Bulb
Temperature (operating)
Four-pin, DC power receptacle
5 VDC 5%—100 mV ripple p-p
12 VDC 5%—200 mV ripple p-p
5 VCD < 1A (typical)
< 1200 mA (maximum)
12 VCD < 600 mA (typical)
< 1.2A (maximum)
Total Drive Power < 2.5 watt
(Standby mode)
Operating 41 to 122 F (5 to 50 C)
10% to 85%
84 F (29 C)
36