Page 1
READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING. PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE. THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. For information and support, www.lenco.eu...
TABLE OF CONTENTS IN THE BOX ................................2 OVERVIEW OF THE DVD PLAYER ......................... 3 REMOTE CONTROL UNIT ............................3 CONNECT DVD PLAYER TO OTHER APPLIANCES ....................4 CONNECTING THE AERIAL TO THE PLAYER ....................... 4 CONNECTING TO A CAR ADAPTOR ........................4 STEREO HEADPHONE JACK ..........................
Page 3
IN THE BOX You should have the following items in the packaging: Portable DVD player Remote control DC power adapter (with rechargeable battery) (with two AAA batteries) Cigarette lighter plug RCA adapter Active antenna Instruction Manual Please retain all packaging materials for when the product needs transportation.
CONNECT DVD PLAYER TO OTHER CONNECTING TO A CAR ADAPTOR The car power adaptor is designed for use with vehicles that APPLIANCES have a 12V or 24V, negative ground electrical system. It is recommended you connect the player to a WARNING: ...
OPERATIONS 3. Press OK button to confirm and the playback from the located scene starts. PREPARATION 4. To exit search menu, press SEARCH button directly. Power on the TV set and select video input mode. Power on the audio system which is connected to the player. PROGRAM PLAY (UP TO 16 MEMORIES) 1.
EXTERNAL MEMORY MEDIA OPERATION MP3/MPEG 4 PLAYBACK (USB&SD/MMC/MS CARD) 1. Load the MP3/MPEG 4 disc onto the disc tray. A media Prepare the player for External Memory media operation menu shows on the screen, select a corresponding media 1. Slide the POWER switch to ON position, Insert an USB type (picture, audio, video) to play the disc with navigation data traveller filled with media files into the USB port or left/right button and press OK Button to confirm.
SUBTITLE 1.6 DEFAULT - Reset to factory settings. Press SUBTITLE button to cycle through the subtitle Options: RESTORE languages supplied by TV signals (Need signal source 2. LANGUAGE SETUP support). 2.1 OSD LANGUAGE - It is used to select different On FAVORITE Screen Display language for different user.
DISC HANDLING PRECAUTIONS Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. ...
SPECIFICATIONS Power source: AC 100-240V~60/50Hz Power consumption: 9W TV systems supported: PAL/NTSC Operating Temperature Range: +5°C to +35°C Dimensions: Main unit: 260(L) x 175(W) x 40.8(H) mm Base: 200(L) x 120(W) x 131(H) mm Operating Humidity Range: 10 % to 75 % Compatible with AVI, MPEG4, XVID, MP3 files.