Language Setup; Video Setup; Speaker Setup; Dvb Operations - LENCO DVT-950 Operating Manual

1.6 DEFAULT - Reset to factory settings.
Options: RESTORE

2. LANGUAGE SETUP

2.1 OSD LANGUAGE - It is used to select different On
Screen Display language for different user.
2.2 AUDIO LANG - select preferred audio language.
(DVD only, need disc software support)
2.3 SUBTITLE LANG - Select preferred subtitle language.
(DVD only, need disc software support)
2.4 MENU LANG - Select preferred disc menu language.
(DVD only, need disc software support)

3. VIDEO SETUP

3.1 BRIGHTNESS - to set the brightness for the display.
Options: 0/2/4/6/8/10/12
3.2 CONTRAST - to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
3.3 HUE - to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
3.4 SATURATION - to set the saturation level for display.
Options: 0/2/4/6/8/10/12

4. SPEAKER SETUP

4.1 DOWNMIX
Options: LT/RT - Left/Right mix mode
STEREO - Select this option if you don't have a 5.1
channels amplifier.

DVB OPERATIONS

GET STARTED

Be sure the TV antenna is connected to your player

properly;
Power on the player. Press FUNCTION button on the

remote or press and hold FUNCTION button on the unit to
switch to DVB-T mode.
A dialogue of first time installation shows on the screen,
select YES option to perform the first time installation, then
select other options indicated in the following dialogues to
finish the first time installation; select NO option to exit this
interface.

SEARCH A PROGRAM

Press CH+/- button to change the channel number. A desired
channel can be reached using these two keys.
Once the desired channel is selected, it will start broadcasting
the selected channel immediately.

SWITCHING BETWEEN TV/RADIO

During DVB play mode, press TV/RADIO button on the
remote to switch to RADIO play mode (Need signal source
support).

TELETEXT

Press TTX button to display teletext information (Need signal
source support).

ELECTRONIC PROGRAM GUIDE

Press EPG on the remote button to enter into electronic
program guide in DVB mode (Need signal source support).

PROGRAM INFORMATION

Press INFO button during DVB play mode to show the
program detail information (Need signal source support).
LANGUAGE
Press LANGUAGE button on the remote to change different
language supplied by TV programs in DVB mode (Need
signal source support).

SUBTITLE

Press SUBTITLE button to cycle through the subtitle
languages supplied by TV signals (Need signal source
support).

FAVORITE

Press FAV button to enable or disable the favorite function
after set the channels class on the setup menu, and press
navigation UP/DOWN menu to switch the channel among
your favorite channels selected on the setup menu.

DVB-T SETUP MENU

1. Press and hold SETUP Button on the unit or press SETUP
button on the remote, the setup menu will be called out on
the screen.
2. Use navigation LEFT/RIGHT button to switch among the
three different main setup interfaces. Press navigation
UP/DOWN button to highlight the setting options and enter
corresponding submenu as indication. After setting, use
SETUP button to go back main setup interface.
3. Short press SETUP button on the remote or press and hold
SETUP button on the unit to exit setup menu.

1. Channel Guide

TV channels - It is used to enter the TV channels list for you
to select or sort the TV channels as your desired.
Radio channels - It is used to enter the Radio channels list
for you to select or sort the Radio channels as your desired.
Channels class - Select this option to edit the programs as
your desired.
Channels edit - Select this option to edit the channels name,
move or delete the channels as your desired.

2. System config

TV setting
TV system: it is used to select TV system.
TV type: it is used to select the TV scan mode, please set as
per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : Normal Letter box mode
16:9 : 16:9 wide screen mode
Video setting
BRIGHTNESS - to set the brightness for the display.
CONTRAST - to set the contrast effect for display.
HUE - to set the colour impression for display.
SATURATION - to set the saturation level for display.
Language
Please select one of desired language for the system.
Parent Control
Change pin-It is used to change the password.
1) Enter old password in the OLD PIN row
2) Enter new password in the NEW PIN row
3) Enter the new password again in the CONFIRM row
The default user password is 0000.
Channel lock-it is used to lock the channels.
Time setting
Time zone-it is used to select local time zone.
System info
Select this option, the system info shows on the screen such
as: Update date, Tuner info, F/W version Model version etc.

3. Installation

Auto scan-select one of country from <select area> row, then
enable and disable the <Lcn Set> via pressing navigation
RIGHT/LEFT button, finally enter <start scan> row by
navigation button to begin scanning the channels.
Manual scan-scroll to manual scan option, a dialogue shows
on the screen for you to set, after then, select <start scan>
option to begin scanning the channels.
Default setup-select this option to restore the factory setting.
7