Advertisement
Bevel cutting
With the base tilted, vou can make bevel
. ,
cuts a t any angle between 0" and 45" (left
or
right).
Loosen the bolt on the back of the base
with the hex wrench, and slide the base
backwards. Tilt the base to the desired
angle. The edge of the housing indicates
the bevel angle. Then check for contact
between the back edge of the blade and the
roller.
Now tighten the bolt securely on the back
of the base.
Front flush cuts
Loosen the bolt on the back of the base
with the hex wrench, then slide the base
backwards. Check the contact between the
back edge of the blade and the roller, then
secure the bolt.
Edge of housing
Roller
.
I
' 1
8
Advertisement
