Advertisement
Templet guide (Optional accessory)
CAUTION :
For your safety, remove the bit before installing the templet guide.
The templet guide provides a sleeve through
which the bit passes, allowing use of the
trimmer with templet patterns.
To install the templet guide, loosen the
wing bolts and raise the side base. Insert
the templet guide onto the base so that the
notch in the templet guide i s aligned with
the small tab on the base.
Return the side base to
i t s
original position
and tighten the wing bolts securely.
Wing bolt
Side base
1
3
Templet guide
Z
h
1 1
Secure the templet to the workpiece. Place
the tool on the templet and move the tool
with the templet guide sliding along the
side of the templet.
B i t -
T/e"let
guide
14
Advertisement
