Logitech Wireless Speaker for Ipad Getting Started page 8

Logitech® Wireless Speaker
If you quickly press the power button, your speaker will turn off but will continue to charge
its battery. If you hold the power button down for 10 seconds, your speaker will turn off
and go into a power-conservation mode, which will stop its battery from charging.
Note: If your speaker is charging in the "off" state, it will automatically turn completely off after
its battery is fully charged.
Wireless connection indicators
Solid green
Flashing green
No light
Note: Wireless connection indicators disabled when using 3.5 auxiliary input.
Help with Setup
Something not sound right? No sound at all?
• Move the speaker closer to your iPad.
• Adjust the volume to an audible setting in your audio source and speaker.
• If another audio device was plugged directly into the speaker, make sure the 3.5 mm
cable is unplugged.
• Quit your music application and then restart it.
Visit www.logitech.com for more troubleshooting tips.
8 English
Connection made between iPad and speaker
Seeking a connection between iPad and speaker.
Green light will flash for 5 minutes before going out.
iPad or speaker is out of wireless range for more than
5 minutes or speaker is powered off