Advertisement
Fully charging the battery can take up to six hours. Your speaker can be used while charging.
To connect with your iPad or iPhone (or one other Bluetooth® device), please follow the instructions below:
Your Wireless Speaker will always connect to the last connected device. So the next time you turn on your speaker, it will connect to your iPad or iPhone if either unit was the last connected device.
You can only connect your Wireless Speaker with one device at a time.
If the wireless connection is lost between your iPad or iPhone and your speaker, you will need to follow steps 4 through 7 to re-establish the wireless connection.
When your Wireless Speaker is connected to your iPad or iPhone, you must adjust the volume through the controls on the Wireless Speaker.
The Logitech Wireless Speaker will pair with two wireless devices. If you decide to pair an additional wireless device to your Wireless Speaker, the previous pairing will be lost.
Discharging | |
Solid green | 50–100% battery life |
Solid orange | 10–<50% battery life |
Solid red | <10% battery life |
No light | Speaker is off or battery needs recharging |
Charging | |
Solid green | 100% charged |
Pulsing green | 50–<100% charged |
Pulsing orange | 10–<50% charged |
Pulsing red | <10% charged |
Note: The battery is removable for disposal/recycling only. Please see www.logitech.com/support for more information.
If you quickly press the power button, your speaker will turn off but will continue to charge its battery. If you hold the power button down for 10 seconds, your speaker will turn off and go into a power-conservation mode, which will stop its battery from charging.
Note: If your speaker is charging in the "off" state, it will automatically turn completely off after its battery is fully charged.
Solid green | Connection made between iPad and speaker |
Flashing green | Seeking a connection between iPad and speaker. Green light will flash for 5 minutes before going out. |
No light | iPad or speaker is out of wireless range for more than 5 minutes or speaker is powered off |
Note: Wireless connection indicators disabled when using 3.5 auxiliary input.
Something not sound right? No sound at all?
Visit www.logitech.com for more troubleshooting tips.
© 2011 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered.
Microsoft, Windows Vista, Windows, and the Windows logo are trademarks of the Microsoft group of companies. Apple, iPod, iPhone, Mac, and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Wireless Speaker for iPad that isn't answered in the manual? Leave your question here.