HP 512424-001 Maintenance And Service Manual page 81

Removal and replacement procedures
36. If it is necessary to replace the wireless antenna transceivers and cables, release the tabs 1 built into the display
enclosure shielding.
37. Release the wireless antenna transceivers 2 from the display enclosure. The transceivers are attached to the
enclosure with double-sided tape.
38. Remove the wireless antenna transceivers and cables 3. The wireless antenna transceivers and cables are
available using spare part number 531781-001.
Reverse this procedure to reassemble and install the display assembly.
4–36 Maintenance and Service Guide