Dri-Eaz CMC100 Owner's Manual

The CMC100 automatically controls humidity in confined areas in many types of spaces, including facili-
ties, marine environments and in residential areas such as crawlspaces, attics and basements.
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING
Read and understand manual before operating.
WARNING! Electric shock hazard, rotating fan, hot surface
hazards. Unplug unit before opening cover for cleaning or
servicing.
WARNING! Unit must be grounded.
• Keep motor and wiring dry. Keep out of standing water
and do not install in area likely to be subject to water intru-
sion. Do not expose to rain, water or snow.
• Insert three-prong plug on power cord into a matching
electrically grounded outlet. Do not use adapter. Never cut
off third prong. Do not use an extension cord.
• To reduce the risk of fire or electric shock, do not use this
unit with any solid-state speed control device.
FIRE HAZARD
• Keep away from open flames and heat sources.
• Do not use or store where vapors from gasoline, solvents,
thinners or other flammable materials may be present.

SAFETY INSTRUCTIONS

WARNING! Unplug unit before cleaning or servicing.
• Turn off unit and unplug before lifting or moving.
• Handle the unit carefully. Always operate the unit on a
stable, level surface. Do not drop, throw, or place where it
could fall. Rough treatment can damage the unit, and may
create a hazardous condition or
void the warranty.
• Inspect the power cord before
use. If cord is damaged, do not
use. Always grasp the plug (not
the cord) to unplug.
• The unit must be operated on a
115V/60 Hz circuit protected by a
07-01637F F391-A 2012-01 Warranty 07-01651
Owner's Manual
CMC100 Dehumidifier
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: (360) 757-7950
Upon receipt of your CMC100,
inspect it carefully for damage.
Set up and test unit in a tempo-
rary location for proper operation
before installing permanently.
http://cmc-100.dri-eaz.com
Ground Fault Interrupter (GFI) device.
• This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental ca-
pabilities, or lack of experience and knowledge, unless
they have supervision or have been given instruction con-
cerning use of the appliance by a person responsible for
their safety.
• Do not attempt to repair the unit. For Authorized Service
Centers, call Dri–Eaz Service at 800-932-3030.
INTRODUCTION
The CMC100 reduces humidity in enclosed structural environ-
ments by removing water vapor from the air. With proper use,
the CMC100 can help to dry out damp structural materials,
insulation, and contents, and maintain a healthy level of humid-
ity. Using the CMC100 may also prevent secondary damage
caused by high humidity.
How the CMC100 works
The CMC100 refrigerant dehumidifier uses a fan to draw moist
air in and condenses it into water that collects in a tray and is
automatically pumped out through a drain hose. A humidistat
automatically shuts the unit off when the desired level of hu-
midity has been achieved.
Features:
• Industrial-quality dehumidifier removes up to 70 pints (33
liters) of water per day.
• Automatic humidistat control means set-and-forget con-
venience.
• Ductable outlet for flexible application.
• Recessed handles for easy positioning in confined spac-
es.
• Interchangeable intake and output panels allow for use is
a wide variety of settings.
• Quiet operation and low power consumption.
NOTICE:
1
• The CMC100 has been awarded
the ENERGY STAR
INSTALLATION
Location
The CMC100 works best in an en-
closed area, as this creates a drying
chamber. Excessive infiltration of
damp air will increase operating time.
Dri-Eaz Products, Inc.