Installation Instructions - Hitachi CMP5000WXE Manuale D'uso

Hitachi Plasma Display Table top Stand
Model
CMPAD06
Thank you for purchasing the Hitachi Plasma Display Table top Stand.
To ensure correct usage, please read this instruction manual thoroughly. After reading, please store this
manual in a safe place for future reference.
This plasma display tabletop stand is for use only with the following model:
CMP5000WX
Request an installation specialist to install this unit.
This company assumes absolutely no responsibility for injuries and damages that may occur due to improper
installation and handling.
Parts Configuration Chart
IConfirming the parts provided
Before assembly,
check to make sure that none of the parts provided are missing.
• Base cover x 1
• Screws (4 x 8) x 4
Ofrecido por www.electromanuales.com
• Stand pipes
(left and right, interchangable) x 2
• Installation bolts 1
(M8 x 20) x 2

Installation Instructions

• Installation bolts 2
(M8 x 40) x 2
• Hexagonal wrench x 1
• Stabilization bolts x 2
33