Hunter ceiling fan Installation Manual page 8

Ceiling Bracket
Use the wood screw to poke holes through
the rubber gasket in order to install the
ceiling bracket assembly to your support
structure or ceiling fan-rated outlet box.
Use wood screws Use machine screws
(included) when securing (provided with outlet
to support structure with box) when securing to
approved electrical outlet existing ceiling fan-rated
box. Drill 3.5 mm pilot outlet box. Make sure
holes in support structure it is securely installed
to aid in securing ceiling and is acceptable for fan
bracket with hardware support of 31.8 kg or less.
found in the hardware
bag.
Note: Do not mount ceiling fan
to a plastic outlet box.
6
MD511-01 • 05/20/14 • © Hunter Fan Company
contatobrasil@hunterfan.com
Use concrete anchors (included)
when securing to support structure
with approved outlet box in a concrete
ceiling. Drill 8 mm pilot holes in
support structure. Hammer the M6
expansion anchors into the holes until
the ends are flush with the ceiling.
Install the washer, isolator, and nut
found in the hardware bag to
the expansion anchors.