What To Expect With Your Installation - Hunter ceiling fan Installation Manual

What to Expect with Your Installation

Must be able to
secure the fan to
building structure or
fan-rated outlet box.
Do not use a plastic
outlet box.
You may need a
friend to help you.
Check box to see
fan weight
If you are unfamiliar
with wiring, use a
qualified electrician.
0,50 meters
from blade tip to
nearest wall or
obstruction
Know your wiring
Standard Downrod
1
for ceilings 2,4 -3 meters high
Shorter Downrod
2
for fans installed close to ceiling
Longer Downrod
3
for ceilings 3 meters or higher
Select a downrod length
MD511-01 • 05/20/14 • © Hunter Fan Company
2,3 meters
from bottom
edge of blade to
the floor
Assess location
Use ONLY Hunter
Ceiling Fan branded
accessory light kits.
2
contatobrasil@hunterfan.com
This product conforms to UL Standard 507.
WARNINGS
w.1 - To reduce the risk of fire, electrical shock, or personal injury,
mount fan directly from building structure and/or an outlet
box marked acceptable for fan support of 31.8 kg and use the
mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the circuit
breakers to the outlet box and associated wall switch location. If
you cannot lock the circuit breakers in the off position, securely
fasten a prominent warning device, such as a tag, to the service
panel.
w.3 - To reduce the risk of fire, electrical shock, or motor damage,
use only Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade
brackets when installing the blade brackets, balancing the blades, or
cleaning the fan. Do not insert foreign objects in between rotating fan
blades.
w.5 - This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
people with a lack of experience and knowledge, unless they have
received instructions regarding the use of the device or under the
supervision of a person responsible for their safety.
w.6 - It is recommended that children be supervised to ensure that
they are not using the appliance improperly
CAUTIONS
c.1 - All wiring must be in accordance with national and local
electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
c.2 - Use only Hunter replacement parts.