Table of Contents
Advertisement
CD-CH1000
146
110
When the height of
STB holder is low,
(Increase the clearance.)
Bend this part.
Scale: 2 magnifications
142
LIFT GEAR A
145
147
111
When the height of
STB holder is high,
(Decrease the clearance.)
240
OS LEVER
Bend this part to adjust the height of the STB holder.
Details
141
143
STB HOLDER HEIGHT ADJUSTING METHOD
Adjusting procedure
1. Turn the mode big gear approx. 37 degrees in the arrow direction.
2. Viewing from the front side of the mechanism, verify that the guide ribs
(CHANGE BOX L/R and STB HOLDER)of tray are as tall as each other.
3. If they are not, bend the lever for adjustment. (Refer to the details.)
Note: Also apply the same adjustment on the R side.
Height of the rib
Figure 18
– 18 –
180
TOP PLATE F
Mark position
132
133
130
135
140
144
180
TOP PLATE F
140
130
135
Hide quick links:
Advertisement
Table of Contents
