HP hn200w Owner's Manual page 64

wireless gateway
Gateway is 192.168.1.1, the starting IP address must be 192.168.1.2 or
greater.
Number of DHCP users: Enter the maximum number of devices to which you
❑
want the DHCP server to assign IP addresses. Accept the default value or you
may enter a number up to a maximum of 253. The maximum number depends
on the starting IP address, so the total number must be chosen such that the
starting IP address + the number of DHCP users – 1 is equal to or less than 254
(which is the maximum value).
DHCP Clients Table: Click DHCP Clients Table to show current DHCP client
❑
information. This information is stored in temporary memory since it changes
periodically, so the list of clients could disappear, as shown on the following
screen:
DHCP Clients Table Screen
64