HP hn200w Owner's Manual page 60

wireless gateway
To enable remote management:
1 Click the Advanced tab.
2 Click the Filters tab and select Enable under Remote Management.
3 Click Apply. A remote managment password will be assigned.
To change remote management password:
1 On the Password screen, in the Remote Management Password box, enter a
new password.
2 Click Apply.
Restore Factory Defaults: Allows you to restore the Gateway default settings.
Note: If you set the Restore Factory Default option to Yes and click Apply, you will
clear all of the Gateway's settings. You will have to set up the Gateway again.
60